Study on Correlation Analysis of Fiber Morphology and Physical Indexes of Paper-process Reconstituted Tobacco

Chinese Agricultural Science Bulletin ›› 2014, Vol. 30 ›› Issue (3) : 289-294. DOI: 10.11924/j.issn.1000-6850.2013-0802
23

Study on Correlation Analysis of Fiber Morphology and Physical Indexes of Paper-process Reconstituted Tobacco

Author information +
History +

Abstract

The fiber morphologies of 23 paper-process reconstituted tobacco samples were studied, and the results showed that: (1)there were extremely significant negative correlation between fiber length and tensile strength, fiber width and tensile strength, significant negative correlation between fiber width and filling rate, significant positive correlation between fiber length and gramme, fiber width and gramme.(2)As fiber length distribution, extremely significant correlation: the range 0.6 mm~1.2 mm,1.8 mm~2.4 mm and tensile strength, 1.2 mm~1.4 mm and gramme, significant correlation: 0mm~0.8 mm、2.8 mm~3.0 mm and tensile strength, 1.2 mm~1.6 mm and thickness, 2.2 mm~2.4 mm and equilibrium moisture content.(3)As fiber width distribution: the range 10 μm~20 μm、30 μm~55 μm and tensile strength, 50 μm~55 μm and gramme, under 10 μm and density, 10 μm~15μm,35 μm~40 μm,45 μm~50 μm,55 μm above and gramme, 25 μm~30 μm and smolder speed, 25 μm~30 μm, 55 μm above and tensile strength.

Key words

paper-process reconstituted tobacco; fiber morphology; physical indexes; correlation analysis

Cite this article

Download Citations
Study on Correlation Analysis of Fiber Morphology and Physical Indexes of Paper-process Reconstituted Tobacco. Chinese Agricultural Science Bulletin. 2014, 30(3): 289-294 https://doi.org/10.11924/j.issn.1000-6850.2013-0802

References

[1] Wang Jian, Qiu Ye, Liu Jing. Study on Physical and Chemical Properties of Domestic and Imported Paper-process Reconstituted Tobacco [J]. Advanced Materials Research,2012,356:1894-1899.
[2] 韩卿,张美云,吴养育,等.造纸法烟草薄片制造工艺的研究[J].西北轻工业学院学报,2002,20(1):19-22.
[3] 孙霞,苏文强.造纸法烟草薄片的研究现状及应用展望[J].华东纸业,2010,41(4):34-39.
[4] 吴宇航,李思东.造纸法烟草薄片的研究进展[J].广东化工,2012,39 (5):90-92.
[5] 吴宇航,李思东.造纸法烟草薄片的研究进展[J].广东化工,2012,39 (5):90-92.
[6] 杨彦明,唐自文,付宇,等.造纸法再造烟叶浸取工艺研究[J].应用化工,2009,38(3):425-428.
[7] 缪应菊,刘维涓,刘刚,等.烟草薄片制备工艺的现状[J].中国造纸, 2009,28(7):55-60.
[8] 杨淑蕙.植物纤维化学[M].北京:中国轻工业出版社,2001:43-46.
[9] 刘晶,邱晔,王建,等.国内外造纸法再造烟叶纤维形态分析[J].中华纸业,2012(16):10-13.
[10] 刘志昌,毛耀,姚元军,等.烟梗仿生物酶制浆与配抄工艺的研究[J].中华纸业,2012(16):6-9.
[11] 曾健,陈克复,谢剑平.打浆对烟梗纤维成纸性能的影响[J].林产化学与工业,2012,32(5):101-105.
[12] 向海英,王浩雅,刘晶,等.造纸法再造烟叶耐破度的测定方法研究[J].中国农学通报,2013,29(01):160-163.
[13] 向海英,王浩雅,刘晶,等.一种造纸法再造烟叶耐破度的测定方法[P].中国专利,CN102721619A,2012-10-10.
[14] 王浩雅,向海英,刘晶,等.一种造纸法再造烟叶抗张强度的测定方法[P].中国专利,公开号:CN102721608A,2012-10-10.
[15] 刘晶,向海英,王浩雅,等.一种造纸法再造烟叶定量的测定方法[P].中国专利,CN102721623A,2012-10-10.
[16] 王建,王浩雅,向海英,等.一种测定造纸法再造烟叶单层厚度和层积厚度的方法[P].中国专利,CN102768031A,2012-11-07.
Share on Mendeley

Accesses

Citation

Detail

Sections
Recommended

/