成型燃料规模化生产的影响因素研究

ljhwtl@.com

中国农学通报. 2006, 22(3): 427-427

中国农学通报 ›› 2006, Vol. 22 ›› Issue (3) : 427-427. DOI: 10.11924/j.issn.1000-6850.0603427
目次

成型燃料规模化生产的影响因素研究

  • ljhwtl@.com
作者信息 +

为了提高成型燃料的燃烧性能和储运性能，通过正交试验,分析了成型燃料的含水率，粉碎粒度与成型直径等因素对成型燃料的重要性能指标-抗跌碎性与抗渗水性的影响程度以及影响规律.结果表明：原料的含水率和粉碎粒度对抗跌碎性与抗渗水性存在显著影响：含水率为10%~15%，粉碎粒

  • 粉碎粒度；成型直径；抗跌碎性；抗渗水性
Author information +
History +

摘要

郑州市文化路95号河南农业大学农业部可再生能源重点开放实验室

Abstract

Liu Junhong1, Zhang bailiang1, Wang gehua2

关键词

(1河南农业大学可再生能源重点开放实验室，郑州 450003；2清华大学 核能与新能源技术研究院，北京 100084)

Key words

(1Key Laboratory of Renewable Energy of Minstry of Agriculture, Henan Agricultural University, Zhengzhou, 450000; 2Institute of Nuclear and New Energy Technology , Tsinghua University, Beijing, 100084)

引用本文

EndNote

Ris (Procite)

Bibtex

导出引用
ljhwtl@.com. 成型燃料规模化生产的影响因素研究. 中国农学通报. 2006, 22(3): 427-427 https://doi.org/10.11924/j.issn.1000-6850.0603427
粉碎粒度；成型直径；抗跌碎性；抗渗水性. 为了提高成型燃料的燃烧性能和储运性能，通过正交试验,分析了成型燃料的含水率，粉碎粒度与成型直径等因素对成型燃料的重要性能指标-抗跌碎性与抗渗水性的影响程度以及影响规律.结果表明：原料的含水率和粉碎粒度对抗跌碎性与抗渗水性存在显著影响：含水率为10%~15%，粉碎粒. Chinese Agricultural Science Bulletin. 2006, 22(3): 427-427 https://doi.org/10.11924/j.issn.1000-6850.0603427

参考文献

With a view to improving characteristics of Straw Densification Briquetting Fuels, by a series of experiments this paper analyzed the influences of stalk size, water content and compression diameter on shatter resistance and water resistance, which are the most important factors to the storage and transportation of it. Thus the optimized production conditions were found out and used to the practical production. It comes to the conclusion that: when the water content is 10%~15%, the stalk size is bigger than 30mm, the result is good ; while the influence of compression diameter is not so great.

15

Accesses

0

Citation

Detail
段落导航
相关文章

/

〈 〉