
基于超体素聚类和局部特征的玉米植株点云雄穗分割
Tassel Segmentation of Maize Point Cloud Based on Super Voxels Clustering and Local Features
针对当前三维点云处理方法在玉米植株点云中识别雄穗相对困难的问题,提出一种基于超体素聚类和局部特征的玉米植株点云雄穗分割方法。首先通过边连接操作建立玉米植株点云无向图,利用法向量差异计算边权值,并采用谱聚类方法将植株点云分解为多个超体素子区域;随后结合主成分分析方法和点云直线特征提取植株顶部的子区域;最后利用玉米植株点云的平面局部特征在顶部子区域中识别雄穗点云。对3种点云密度的15株成熟期玉米植株点云进行测试,采用F1分数作为分割精度判别指标,试验结果与手动分割真值相比,当点云密度为0.8、1.3和1.9个点/cm时,雄穗点云分割的平均F1分数分别为0.763、0.875和0.889,分割精度随点云密度增加而增高。结果表明,本研究提出的基于超体素聚类和局部特征的玉米植株点云雄穗分割方法具备在玉米植株点云中提取雄穗的能力,可为玉米高通量表型检测、玉米三维重建等研究和应用提供技术支持。
Accurate and high-throughput maize plant phenotyping is vital for crop breeding and cultivation research. Tassel-related phenotypic parameters are important agronomic traits. However, fully automatic and fine tassel organ segmentation of maize shoots from three-dimensional (3D) point clouds is still challenging. To address this issue, a tassel point cloud segmentation method based on point cloud super voxels clustering and local geometric features was proposed in this study. Firstly, the undirected graph of the maize plant point cloud was established, the edge weights were calculated by using the difference of normal vectors, and the spectral clustering method was used to cluster the point cloud to form multiple super voxel sub-regions. Then, the principal component analysis method was used to find the two end regions of the plant and based on the observation of the straight direction of the bottom stem regions, the top and bottom regions were distinguished by the point cloud linear features. Finally, the tassel points were identified based on the plane local features of the point cloud. The sub-regions of the top region of the plant were classified into leaf regions, tassel regions, and mixed regions by plane local features of the point cloud, the tassel points in the tassel sub-region, and the mixed region were the finally segmented tassel point clouds. In this study, 15 mature maize plants with 3 point cloud densities were tested. Compared with the ground truth segmented manually, the average F1 scores of the tassel segmentation were 0.763, 0.875 and 0.889 when the point cloud density was 0.8/cm, 1.3/cm, and 1.9/cm, respectively. The segmentation accuracy of this method increased with the increase of plant point cloud density. The increase of point cloud density and the number of point clouds mainly affected the calculation results of point cloud plane features in tassel segmentation. When the number of point clouds was small, the top leaf point cloud was relatively sparse. Therefore, the difference between the plane feature of the leaf point and the plane feature of the tassel point was not obvious, which led to the increase of the misclassification of the point cloud. However, the time complexity of the algorithm was O(n 3), so the increase in the density and number of point clouds would lead to a significant increase in the running time. Considering the segmentation accuracy and running time, the research obtained the best effect on the mature maize plants with a point cloud density of 1.3/cm and an average number of 15,000. The segmentation F1 score reached 0.875 and the running time was 6.85 s. The results showed that this method could extract tassels from maize plant point cloud, and provided technical support for the research and application of high-throughput phenotyping and three-dimensional reconstruction of maize.
玉米雄穗 / 三维点云分割 / 表型检测 / 超体素聚类 / 局部特征 / 主成分分析 {{custom_keyword}} /
maize tassel / 3D point cloud segmentation / phenotyping / super voxels clustering / local features / principal component analysis {{custom_keyword}} /
表1 算法运行时间Table 1 Algorithm running time |
点云密度/(个·cm-1) | 超体素聚类平均运行时间/s | 植株顶部子区域提取平均运行时间/s | 雄穗点云识别平均运行时间/s | 平均总运行时间/s |
---|---|---|---|---|
0.8 | 1.58 | 0.53 | 0.15 | 2.26 |
1.3 | 4.61 | 1.77 | 0.47 | 6.85 |
1.9 | 17.78 | 8.11 | 1.48 | 27.37 |
表2 雄穗分割精度Table 2 The accuracy of tassel segmentation |
点云密度/(个·cm-1) | F1分数 | 精确率 | 召回率 | ||||||
---|---|---|---|---|---|---|---|---|---|
最小值 | 平均值 | 最大值 | 最小值 | 平均值 | 最大值 | 最小值 | 平均值 | 最大值 | |
0.8 | 0.531 | 0.763 | 0.911 | 0.370 | 0.746 | 0.993 | 0.607 | 0.832 | 1.000 |
1.3 | 0.714 | 0.875 | 0.976 | 0.568 | 0.898 | 1.000 | 0.613 | 0.867 | 1.000 |
1.9 | 0.737 | 0.889 | 0.998 | 0.802 | 0.950 | 1.000 | 0.584 | 0.849 | 1.000 |
1 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
2 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
3 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
4 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
5 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
6 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
7 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
8 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
9 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
10 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
11 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
12 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
13 |
王传宇, 郭新宇, 吴升, 等. 基于计算机视觉的玉米果穗三维重建方法[J]. 农业机械学报, 2014, 45(9): 274-279.
{{custom_citation.content}}
{{custom_citation.annotation}}
|
14 |
温维亮, 郭新宇, 杨涛, 等. 玉米果穗点云分割方法研究[J]. 系统仿真学报, 2017, 29(12): 3030-3034, 3041.
{{custom_citation.content}}
{{custom_citation.annotation}}
|
15 |
温维亮, 王勇健, 许童羽, 等. 基于三维点云的玉米果穗几何建模[J]. 中国农业科技导报, 2016, 18(5): 88-93.
{{custom_citation.content}}
{{custom_citation.annotation}}
|
16 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
17 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
18 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
19 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
20 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
21 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
22 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
23 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
24 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
25 |
韩东, 杨贵军, 杨浩, 等. 基于立体视觉的玉米雄穗三维信息提取[J]. 农业工程学报, 2018, 34(11): 166-173.
{{custom_citation.content}}
{{custom_citation.annotation}}
|
26 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
27 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
28 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
29 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
30 |
仇瑞承, 张漫, 魏爽, 等. 基于 RGB-D相机的玉米茎粗测量方法[J]. 农业工程学报, 2017, 33(S1): 170-176.
{{custom_citation.content}}
{{custom_citation.annotation}}
|
31 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
32 |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
{{custom_ref.label}} |
{{custom_citation.content}}
{{custom_citation.annotation}}
|
/
〈 |
|
〉 |